Classification of Open-Pit Mining Methods
Open-pit mining methods extract mineral deposits near the Earth’s surface. The appropriate method depends on the deposit’s geological characteristics, economic conditions and available equipment.
1. Factors affecting method selection
| Factor | Considerations |
|---|---|
| Deposit characteristics | Geometry, topography, depth and thickness |
| Economic conditions | The economic context of the operation |
| Equipment | Equipment available for mining |
2. Classification
Open-pit methods are classified according to:
- Deposit geometry
- Direction of mining operations
- Overburden removal and waste-disposal method
Classification by Deposit Geometry
1. Horizontal deposits
Horizontal deposits have a small dip angle and extend mainly horizontally. They are typically mined by removing overburden in successive strips or layers, then extracting the underlying mineral.
| Method | Key feature |
|---|---|
| Strip mining | The deposit is divided into successive strips. Overburden is removed to expose the mineral; waste may be placed in previously mined-out areas. |
| Contour mining | Used mainly in hilly or mountainous terrain; mining follows the hillside contour to expose the mineral seam. |
2. Inclined deposits
Inclined deposits have a moderate dip. Bench layout and mining direction are adapted to the orebody’s inclination and geometry.
| Configuration | Direction of mining |
|---|---|
| Longitudinal | Along the strike or length of the deposit, with working faces generally parallel to it. |
| Transverse | Across the deposit, generally perpendicular to its strike, exposing and extracting it across its width. |
| Combined | A combination of longitudinal and transverse mining, used when deposit dimensions or geometry require a change in extraction direction. |
3. Steeply dipping deposits
Steeply dipping deposits have large dip angles, often approaching vertical. The elevation difference between the hanging wall and footwall makes extraction more complex. The method must provide access to the orebody, enable efficient waste-rock removal, and allow selective mineral extraction.
Key principle: Deposit inclination and geometry determine how the orebody is accessed and how extraction is organized.
Classification by Direction of Mining Operations
1. Classification by direction of mining operations
The direction of mining operations describes how working faces advance in relation to the deposit’s geological structure.
| Method | Direction of advance | When or why it is used |
|---|---|---|
| Longitudinal mining | Parallel to the deposit’s strike or longitudinal axis | Suited to deposits with considerable longitudinal extension and geometry that permits mining along their length. |
| Transverse mining | Perpendicular to the deposit’s strike | Advances across the orebody’s width and may facilitate separation of ore and waste during extraction. |
| Combined mining | Successive or simultaneous use of longitudinal and transverse directions | Used when neither direction alone provides the most suitable organization of extraction operations. |
Key distinction: Longitudinal mining advances parallel to the strike; transverse mining advances perpendicular to it.
Sheshko’s Classification of Overburden Removal Methods
1. Basis of classification
Sheshko’s classification groups open-pit overburden-removal methods according to how waste rock is moved from the working face to the waste dump. It distinguishes five main classes.
| Class | Method | Main principle |
|---|---|---|
| I | Non-transport | Excavators transfer overburden directly to an internal dump, without separate transport equipment. |
| II | Transport-dumping | Specialized equipment excavates and transports overburden toward internal dumps. |
| III | Special | Specialized techniques and equipment move or remove overburden. |
| IV | Transport | Separate equipment loads and transports excavated overburden to dumps. |
| V | Combined | Two or more overburden-removal systems are used together. |
2. Class I — Non-transport methods
| Group | Description |
|---|---|
| Simple | Waste rock is transferred directly into the internal dump. |
| Multiple rehandling | Excavators move the waste rock several times before it reaches its final dumping position. |
3. Class II — Transport-dumping methods
Specialized equipment excavates and transports waste rock toward internal dumps. Examples include cantilever spreaders, transporter-dump bridges, and tower excavators.
4. Class III — Special methods
These methods use specialized techniques or equipment for moving or removing overburden. Examples: cable cranes, tower excavators, hydraulic methods, and wheel scrapers.
5. Class IV — Transport methods
Overburden is excavated, loaded, and transported using separate transport equipment.
| Destination | Group |
|---|---|
| Internal dumps | Transportation to internal dumps |
| External dumps | Transportation to external dumps |
| Both | Transportation to internal and external dumps |
Typical equipment includes dump trucks, locomotives and rail wagons, and conveyor systems.
6. Class V — Combined methods
Combined methods use two or more waste-removal systems. For example, overburden may be divided into vertical zones: the upper zone is trucked to an external dump, while the lower zone is transferred directly to an internal dump by excavators or specialized dumping equipment.
The defining criterion is how overburden is moved from the working face to the dump.
Classification by Mining System
1. Classification by mining system
Open-pit mining systems are classified by how excavation and material transport are organized: conventional (discontinuous), continuous, or combined.
| System | How it works | Typical equipment | Main characteristics |
|---|---|---|---|
| Conventional (discontinuous) | Separate machines perform successive operations: drilling, blasting when required, loading, hauling, and dumping. Excavators or shovels load material into trucks for transport. | Drilling rigs and blasting equipment; hydraulic excavators or electric shovels; wheel loaders; haul trucks. | Flexible for different deposit geometries, rock conditions, and production requirements. Repeated loading and hauling cycles can result in high fuel, maintenance, and haulage costs. |
| Continuous | Excavation and transport occur in a continuous or integrated flow rather than through separate truck-loading cycles. | Bucket-wheel excavators; belt conveyors and transfer points; spreaders; surface miners in suitable conditions. | Can provide high, relatively steady production and reduce dependence on trucks. Requires substantial initial investment, careful planning, and suitable, relatively consistent materials and operating conditions. |
| Combined | Integrates conventional and continuous equipment. | For example, drilling, blasting, and shovel-and-truck operations for hard rock, with conveyors and spreaders to transport or dump suitable material. | The arrangement depends on the deposit, material properties, production targets, and mine layout. |
Key distinction: Conventional systems use separate loading-and-hauling cycles; continuous systems move material in an integrated flow.